I'd assume your using Versaworks to control the printer and that you have the Roland cut color applied to your design?

The Versacamm will not cut without the cut color being applied to the border of your graphic.....that's what the software reads to cut.

Hope this helps...

 

Thank you for your response.
I have a few questions form your reply.

I bought this machine 2nd hand for cutting use only.
I am not using the versaworks as i cannot find it on the internet and only found the updates.
NO USE

I am using the Roland CUTSTUDIO
[ By the way i go it to work. i dont know what fiddling i did. But its working}

1) What is the CUT color significance. I mean i desing crops in corel and copy them to roland cutstudio. Does the out line has to be defined too ?

 

I am not sure if you can print and cut with a different printer. But the problem you are describing is not a hardware obstacle. It's a software one. You said you couldn't get the cutstudio program to use the print and cut function. I found that if you have a printer directly connected to your computer, all the greyed out options should be present. For some reason I am not able to get the print and cut function to work too if all my printers are networked. But works find if it is directly connected to my computer?

Once you fix the software problem, you can try it. But there is a high chance the hardware won't print and cut from another printer?

It's odd that you want an inkjet transfer instead of a solvent print and cut?
Solvent ink is a lot cheaper than inkjet inks most of the time. And maybe there is media that works the same as the inkjet light paper but in bigger rolls and with solvent inks?
Media in rolls is normally cheaper than the individual sheets as well since less cutting involved so would save on labour costs?

 

You are right. but there are some internal issue owing to which i need to use inkjet.

I solved most of the issues.
Can you please me this

i installed the adobe illustrator 10 and its Rcutstdio plugin.
i cant seem to find it in the Adobe.
Its there in the installation folders/ plugins