I think sublimation is probably the best option. Since you don't have a sublimation setup @skdave could help you out with the transfers, assuming you already have a heat press, since you are into vinyl.

 

I do have a heat press. However, purchasing dye sub tiles and transfers are expensive and limiting. There has to be a cheaper way to achieve black ink on a standard tile. I need to be able to print on different tile designs, not just white.

 

If durability is not critical, you could use hard transfer paper for laser printers. An example paper is Mugs & More. You can then print on ordinary tiles. If you're only printing black, a monochrome laser printer might work, but research which models will best work with the paper you use. On some printers the paper will just jam. You might also be able to take the paper into a copy shop, and have them run it off on their machines.

As needed, you could spray a protective coat after printing, but sublimation still provides a more durable product.

Another option, for 150 large tiles, is to outsource it to someone else.

 

These can work but getting full coverage into the bevel area is hit or miss.

Myself along with several others over at DSSI years ago were testing different tiles with various pads and methods were never able to get consistent results. One vendor even had some custom "superpads" made with very thick pliable hi temp rubber, still no luck.

As you mention being able to use Home Depot tiles is huge so a big push to make it work was tried. There are some really oddball tiles available that are not available coated that would be nice to decorate, but several I know including myself that are tile specialists never got it consistent.

Unlike sublimation you need mechanical adhesive to make the toner stick and the only thing that worked fairly well was nomex felt in the bevel areas, the problem with the nomex was it left a noticeable ugly pattern in the transfer. OEM toner transfers need a super smooth pad surface.

Another problem is that from piece to piece no ceramic tile is perfectly symmetrical in the geometry. Getting the correct pressure across the entire surface and into the bevels and corners you need more precision. Sublimating is more forgiving in the corners and bevels in that you just need gas to travel, it doesn't need to bond mechanically like a "toner sticker".

If you don't need full bleed these are not bad. But 150 tiles for a commercial order is going to be a huge problem if they are full bleed tiles.

You can post bake the tiles at around 300 degs. to make the toner more durable, not durable enough to be a functional surface, but good enough for decorated items to just be looked at. Sublimation is not really durable either, depends on the coating, scratching the coating is always a problem. So both methods fail as being "durable".

In lieu of DIY sublimation outsourcing this kind of order would be best as you mention.

 

Check out nazdar ink. They make enamel silkscreen inks and specialty inks for metal, glass etc.

Sent from my SCH-I535 using T-Shirt Forums

 

If the tiles are just for decorations, why not just use sign vinyl and cut them out on your sign cutter?

 

I agree. Sign vinyl looks great on tiles, is relatively inexpensive and you can successfully get small detail. For added durability you can spray them with some sort of sealer.

 

Should be easy. Probably get 9 or 12 up on a screen. If they were unglazed you could screen print them with undrglaze paint and have yhem glazed and fired for a super permanent application

Sent from my SCH-I535 using T-Shirt Forums

 

You could try Tattoo Paper for a Ink Jet Printer. I have heard of people using it for other projects. It is a wet transfer to skin and other objects. Just print and trim it out with scissors, get it damp and it slides free of it's backing on to the surface. Then let dry and you should probably spray coat it with an acrylic spray.You can you get the spray at a hardware store like Home Depot. The paper is clear so your tile will show though anywhere you don't print. The Color of the tile will be the background color.

Try http://www.coastalbusiness.com/tattoopaper.aspx for the paper. You can get this type paper many places and on ebay

 

Solvent ink should work. Then seal then with enamel or epoxy paint.

Since you have heat press you could always order tiles and have skdave print the sublimation transfers and press your self

 

I would love to do that but then i would have to have him print the tile background as well not to mention the price of the tiles. Its for a family member and they hve already purchased teh tiles.

Wonder where i can pick up the solvent ink.... There has to be a way to print them with a screen. There are companies applying text and images to pre glazed ceramic tiles just as i have.

Lowes has them in the garden center as well, they are standard tiles that have been printed with some sort of black ink and coated.

 

Like I said before Nazdar sells screen printing inks for all applications

Sent from my SCH-I535 using T-Shirt Forums

 

Michael's or other hobby store should have ink the can be brushed on tiles. Just use a high mesh screen them let air dry and seal with a spray can. Btw Dave's prices are really good but your tiles have to be coated and since you already have tiles. If you have the time order from Nazdar. Anytime I needed to do something besides clothing I've just called them and they would send proper ink.

 

How much does the tile cost from Lowes?

 

I purchased the tiles from lowes for $0.63 a piece.

 

A glass tile 4" x4" is most likely out of your price range. see example in lower left corner. 500 for $3.00 each. No limit on art or photo. All Dye sublimation.

 

On clean ceramic tile:
1. Make a copy of your photo with dry toner printer like laser printer. Office Depot or walgreen or CVS can do this if you don’t have one.
2. Apply Martha Stewart Crafts Photo Transfer Medium for Light/Clear Surface if using white tile. If using dark tile use Modge Podge Photo transfer medium.
3. Put photo onto tile with ink side down.
4. Use credit card to to pres photo down going back an forth for a couple of minutes. Use fingers to press down edges.
5. Let dry for 24hrs.
6. Put tile under cold running water and use hand towel to rub off all paper. Make sure all paper is off. Let dry.
7. Spray with Modge Podge acrylic sealer. Let dry.

 

Another noobie digging up 6 year old posts! 🙂