T-Shirt Forums banner

Yupoong flex fit question

1834 Views 2 Replies 3 Participants Last post by  idonaldson
I just purchased a hotronix hat press and the platen that came with it does not fit a yupoong [6277] hat very well. I was curious if a new platen would help and what style of platen I would need. Thanks.
1 - 3 of 3 Posts
there should be other sizes! our dk-7 has many, and you can order custom ones. good luck uncletee.
I also use those caps and the same heat press - I brought mine with three different ones and I will see if they have a number or size. I will say if you use the wrong one you will get a mark across the top.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.