T-Shirt Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
181 Posts
Discussion Starter · #1 ·
Does anyone know what this means??

When ever I turn on the printer I get one ink fault. I press the ink button and it charges the ink then more ink errors. I repeat the process and I get a fatal error. It says x -hot detection after flashing. Does anyone know what this means??

Thanks

Kully
 

·
Registered
Joined
·
181 Posts
Discussion Starter · #3 ·
Just a update. If anyone has this problem. Check your ribbon connections. I fixed my problem because one the ribbons that are used for the ink were not seated properly. This error is usually caused by the ribbons shorting out. So check your ribbons in the head and mainboard

Kully
 

·
Registered
Joined
·
1 Posts
Just a update. If anyone has this problem. Check your ribbon connections. I fixed my problem because one the ribbons that are used for the ink were not seated properly. This error is usually caused by the ribbons shorting out. So check your ribbons in the head and mainboard

Kully
Thank you so so much for posting this! I've spent all day trying to figure out what it was. I thought the water cooling system broke down. Can't believe it was so simple. Your post really saved all of it. Very grateful!
 

·
Registered
Joined
·
2 Posts
Just a update. If anyone has this problem. Check your ribbon connections. I fixed my problem because one the ribbons that are used for the ink were not seated properly. This error is usually caused by the ribbons shorting out. So check your ribbons in the head and mainboard

Kully
Hey Man how to fix this ribbon connector I'm having big troubles here i may damage something else
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top