T-Shirt Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
423 Posts
Discussion Starter #1
Recently had a request for a print that goes from the front of the shirt to the back and I have been looking at wrap around pallet systems . I like the Warrior XPS extreme

[media]http://www.youtube.com/watch?v=aYG89yXK_rQ[/media]

from Action Engineering | Production Accessories for Textile Printing

I have sent a email request to see whether I can see if it is an option for my ADTEC manual press .

The question I have is what systems are available in Australia that you know of ? . Sure the Warrior XPS system would be amount to an outlay but it seems as it would make a wraparound print much less of a headache . Also like the feature of moving the shirts either left or right of centre line . The image that they have initially shown me for the wraparound print is like an engineering drawing so registration has to be fairly tight .
 

·
Registered
Joined
·
255 Posts
I don't know of any suppliers in OZ?
I do wrap around designs from center front to center back (seamless) t-shirts with a big platten with a split cut into the top (for the sleeve to drop down) that allows printing to just under the arm pit.
Waste of money if your not printing allover on the front and the back in my option.
 
1 - 2 of 2 Posts
Top