T-Shirt Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
4,624 Posts
It is a feature that agitates the white ink in the lines by sending the print head carriage back and forth the carriage rail for 5 minutes. It is recommended that you do this every morning before your print. This helps minimize the waste associated with doing cleanings on the white ink side.

Hope this helps.

Mark
 

· Registered
Joined
·
129 Posts
Discussion Starter · #4 ·
It is a feature that agitates the white ink in the lines by sending the print head carriage back and forth the carriage rail for 5 minutes. It is recommended that you do this every morning before your print. This helps minimize the waste associated with doing cleanings on the white ink side.

Hope this helps.

Mark
Thanks, good to know.

Looks like a ninja feature since I updated the firmware. Found no info on it in the latest manual.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top