[dRad]

Looks like I am losing another white head! What a pain in the butt. I do every maintenance cycle and my humidity runs at 50-58% and this still happened.

Has anyone successfully gotten a head to come back to life using a third party head cleaning kit?

 

[jtilden]

Nope!....The problem isn't clogged heads, if it was those kits would work at least sometimes, life would be great. The circuit board on the four I lost last year was the culprit every time. Darn heads would stop taking on fluid or ink, yet the maintenance fluid that you pushed through with the syringe was a perfect shower every time. I attributed it to air getting to my heads via the capping stations. I remove my capping stations entirely now when cleaning them instead of using the swabs. I also clean the wipers to make sure no white ink gets caked on them. Will see if this helps prevent the heads from going out again.

 

[walkerwm]

You'll love my failure cause, This white is crap. Good Luck, hope you have better luck with tech support then I did.