T-Shirt Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
602 Posts
Discussion Starter #7
They look good, can I ask a question. Do you have the XL platen as those prints look nice & big?

Regards

Colin
Yes the images look big and are big but we use the standard 46cm x 36cm platen.

The CLUB shirt was printed without white ink or pre-treatment. We used the CADlink option of splitting when to print each CMYK colour.

The first layer was printed with Cyan and Yellow then Magenta and Black printed in the second layer.
 

·
Registered
Joined
·
837 Posts
Yes the images look big and are big but we use the standard 46cm x 36cm platen.

The CLUB shirt was printed without white ink or pre-treatment. We used the CADlink option of splitting when to print each CMYK colour.

The first layer was printed with Cyan and Yellow then Magenta and Black printed in the second layer.
That print mode gives great results, if you take off the time you save on pre treating it's almost as quick with less cost. It's not a standard setting in the rip but if anyone wants the details of the queue please contact the office for info.
 
1 - 8 of 8 Posts
Top