What Temp, Pressure & Time for Hotfix Sequins?
1 - 3 of 3 Posts
Joined
·
5,412 Posts
From our website:
Sequin Transfers
Pre-press garment; 5-7 seconds.
Peel the white sheet and discard.
Place sticky side down on the garment.
Set pressure at heavy.
Set temperature at 340 degrees Fahrenheit.
Print 8 seconds.
Peel warm (about 3-4 seconds), in one continuous, smooth motion.
Top of Page
Sequin Transfers
Pre-press garment; 5-7 seconds.
Peel the white sheet and discard.
Place sticky side down on the garment.
Set pressure at heavy.
Set temperature at 340 degrees Fahrenheit.
Print 8 seconds.
Peel warm (about 3-4 seconds), in one continuous, smooth motion.
Top of Page
Joined
·
213 Posts
We have different instructions. A cold peal. Let the group know what works best for you.
Application Instructions:
For standard 100% Cotton Shirt
Heat Press temperature at 345° Fahrenheit.
Heat Press pressure at medium to heavy.
Remove the white backing from transfer.
Place the transfer face up on fabric.
Press directly onto the clear (heat-resistant) film.
Press for 8 to 10 seconds.
Let cool for1 minute then slowly peel off plastic.
Press again for 5 seconds.
Scott
Application Instructions:
For standard 100% Cotton Shirt
Heat Press temperature at 345° Fahrenheit.
Heat Press pressure at medium to heavy.
Remove the white backing from transfer.
Place the transfer face up on fabric.
Press directly onto the clear (heat-resistant) film.
Press for 8 to 10 seconds.
Let cool for1 minute then slowly peel off plastic.
Press again for 5 seconds.
Scott
1 - 3 of 3 Posts
