T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Your not curing long enough. white ink needs almost double that I cure white/underbased prints for 2:40 seconds @333f
If that doesn't help.
Try a different brand shirt. have you used them before recently with success? they could be treated with something for a softer feel or stain protection etc. is it a new unwashed shirt?
Are you diluting preTreat with distilled water or reg tap water?
Also try prepressing the shirt to flatten and remove moisture etc before pretreatment.
Are you sure your press is maintaining temps?
the last pic just looks like poor coverage of pretreat
Also make sure you shake the heck out of your pretreat before using. dupont settles horribly.
I use and recommend a hand pump sprayer much easier than a wagner.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top