T-Shirt Forums banner
1 - 7 of 7 Posts

· Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
Ok we are going on a vacation for 5 days and we barely have enough Neotex Cleaning solution anyone have any ideas? What can we use to leave in the lines while we are gone? Help leaving tomorrow and pulled a stupid of not ordering more neotex! I have read we can leave the CMYK is this ok for 5 days? Just not the white correct? Called tigers and no one got back to us! Any help would be greatly appreciated I don't want to cancel our trip!
 

· Registered
Joined
·
93 Posts
we have left our printer once for four days:eek: came back shook the inks for extra long time, and did like 2 power cleans and everything was fine:D. During that time the humidity did not drop below 48% and auto clean was every 4 hrs ,would not recommend letting this happen thou:rolleyes:;).
 

· Registered
Joined
·
2,628 Posts
if you don't have white ink installed, you are fine to just let the auto-maintenance run. if you do have white ink installed, you need to get it out. you can use distilled water to flush the lines, then mix your cleaning fluid 50/50 with distilled water so that you have enough. the head cleans use very little ink, so you'll be fine for 5 days, but you MUST get ALL the white ink out of your head.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top