T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
We are making t shirts for a women's run and adding a photo of a coworker that we lost this year. We want to screen print "In Memory Of" and her name. We are using Plastisol ink. Below the screen printed words we plan to use JetPro SS heat transfer paper to add a photo of our friend and coworker. The temp. for the photo is 375 and we usually cure our shirts at 340 using a flash dryer as we this is all we have at the moment. We are fairly new to the t shirt business. Any ideas on how we should proceed? Many thanks in advance for the responses.
 

·
Registered
Joined
·
104 Posts
I believe you can use a domestic iron with the Jetpro SS although I've only ever used a heatpress. As you need the heatpress on max pressure I'm not sure how good the results will be with a domestic iron. In doubt it'll work very well (if at all) with just a flash dryer and no pressure on the paper.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top