T-Shirt Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·

I'm french. Sorry for the quality of the translation.
Here is an example of my problem for production at 374 °F.

The temperature progresses normally then the top plate suddenly stops heating before reaching 374 °F and the temperature decreases. Normally, a slight noise is heard when it heats up then the noise stops and the heat decreases. It's like a fuse blows. The display appears to correspond to the actual temperature. The degrees displayed follow the decrease in temperature.
Sometimes the display suddenly shows 451 °F (the maximum temperature) and then drops back to the actual temperature. Sometimes the heat stops during production for no reason.
When this happens, we turn off the press and turn it on again after a few minutes. Sometimes the temperature stabilizes but it becomes rare. The press should be turned on and off often.

I don't know what else to tell you. It is not easy to transcribe this problem.

After this information, do you have an opinion?

Thanks for your help.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.