T-Shirt Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
314 Posts
Discussion Starter · #1 ·
Hi, everyone. Just wondering a couple things regarding underbases for dark shirts.
If my design has several colors AND white, can I print the white in the same screen as the underbase? If so, would I put the underbase portions of the screen at an 80% halftone or something so they aren't as thick as the full white portions?
And what meshcount should I use?
Thanks in advance!
 

· Registered
Joined
·
89 Posts
what Ken says is best - use a second screen for your highlight white.

otherwise, you can just use a single white screen, print the first stroke, flash this and then print white again on top of that for a bright white. now just print your other colors on top of this solid white. be careful not to over-flash your white otherwise other colors will not adhere properly.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top