T-Shirt Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
167 Posts
Discussion Starter · #1 ·
Good Morning,

Thank you all for the great posts and information, I have recently been asked if I could print the attached design on a heavy cotton grey(Ash) shirt. Customer is requesting waterbase ink... Does not like the heavy plastic feeling. I have found my ink and now moving forward. Customer provided me a vector image that I was able to seperate out, Can anyone take a look at the image and give me pointers as how I should print this to get the most out of the image.

1. Lasy down all the Gold Ink, then Lay down black ink on top or vice versa.

2. Should I be using halftones?

3. I am using 156 Mesh Screens is that ok?
 

Attachments

·
Registered
Joined
·
167 Posts
Discussion Starter · #3 ·
So my first attempt I screwed up, when I burned my image, My damn glass slipped when I put my frame down. so I got a line accross the top of my image, then bonehead me... Tried to apply a second coat of gold freehand without the press just with the frame. "the guys on youtube make it look oh so easy"
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top