[mistoner]

HOW TO PRINT ON MOUSE PADS.

1) PRETREAT YOUR MOUSE PADS
(MAKE SURE THE PRETREATMENTS GETS NICE AND SOCKED IN AND NOT JUST SITTING ON TOP)

2) TEST
JUST LIKE MY OVER THE SEEM TUTORIAL WERE GOING TO PRINT OUR IMAGE ON OUR TABLE FIRST, LIGHT 1 VIVID (CAN BE ANY COLOR MODE ) ON PAPER.

3) PLACEMENT
NOW THAT WE KNOW WHERE THE IMAGE WILL PRINT JUST PLACE THE MOUSE PAD OVER THE PRINTED GRAPHIC ON THE TABLE. (YOU WILL NEED TO ADJUST TABLE FOR THE MOUSE PAD)

4)PRINTING
DEPENDING ON THE TYPE OF MOUSE PAD YOU USING SETTING WILL BE DIFFERENT, IF YOU HAVE THICKER MOUSE PADS LAY DOWN MORE INK, (NO WHITE INK IS NECESSARY) IM USING A RATHER THINNER MOUSE PAD, SETTING ARE LIGHT 1 SUPERFINE

5) HEAT PRESS

330 DEGREES FOR 90 SECONDS

ALL DONE

 

[CoorsDTG]

That's a great looking print! Did you use Anajet's Polybright ink for that or the regular CMYK? I've only tried 1 mousepad and the edges of it curled up on the heat press. It must have been a cheapie or made of nylon or something.

 

[mistoner]

That's a great looking print! Did you use Anajet's Polybright ink for that or the regular CMYK? I've only tried 1 mousepad and the edges of it curled up on the heat press. It must have been a cheapie or made of nylon or something.

Hey coors

I used regular CMYK inks, yea they sometimes curl up when they might be too much presure on your heat press also really low quality mouse pads tend to curl up after heat pressing.

 

[ANAdude]

I just did the same with the small round place mats for cups, same material, looks great!

 

[HDC]

Thumbs up great info

 

[HDC]

What do you sell the mouse pads for,? {ball park}got a bunch here and not sure what to charge{company logo on pad}thanks

 

[Karl T]

Very cool, love your graphics, this is what it's all about.

 

[TurnMike]

can you recommend a brand and quality of mouse pad and also a supplier? Your look great!

 

[ANAdude]

Try bestblanks.com, make sure you buy the thin ones, the 1/4" thick ones will work but are not very good with optical mouse.

 

[this is me]

that turned out Great !!

thanks for sharing