[lindaschallenge]

When I am on the tracing, for some reason I cannot see all of the smoothing settings. It only goes so far. I am getting a little better at it, but for some reason, I would like to know how to get the whole adjusting part visable. I tried the arrows, but will not go any wider. It helps to see if you need more or less on the smoothing. I have a saw blade I'm not real satisfied with the edges being sharp like their business card. Also the letters aren't coming out with sharp details for letters. When I get it to the cutter, it is more like the outline. Nothing with the centers to weed out. Help? If anyone can.
lindaschallenge

 

[pixelwhisperer]

Hey Linda,

Try vectorizing it at magnigraph.com Then open it in corel and ungroup it. Keep the saw if it is clean enough then just add the text with the closest font you can find. You will probably need to clean up the saw a little to get it to have nice sharp lines. I find it easier to just trace over the image with the pen tool rather than trying to clean up really rough auto trace. hope this helps

 

[lindaschallenge]

Big thanks, I will give it a try! lindaschallenge