Joined
·
1 Posts
Hey there. I am new to the boards but need some help. I am the repair tech for the embroidery machines at our shop, we recently aquired an 830 thinking I could fix it up and I have...I just cannot find a way into the test screens to get the degree of the machine set to do the timing. I know it needs to be set while the machine is at 201° w/ a 3° allowance but I cannot even get it to show me what degree the machine is at. I can get into the test screen by having the bottom flip switch on...but to get into the menu screen from there, there is no button that works. I am assuming it is probably a combination of buttons as with other machines...but just can't figure it out. Any help is appreciated.
