[Kysmiley1]

I have an order of 50 pull-over hoodies. Can anyone offer any tips on printing on hoodies.
Pat

 

[splathead]

Assuming you are talking about printing on the chest area, they are no different to print than shirts.

 

[jerry23774]

Yeah. Pretty much the same as a tee but with a hood and a bit thicker in fabric. If your flashing, watch the speed so you don't burn. If you had zippers, then you'd have to build a jig to allow the zippers to fit into to have a nice clean sweep. Be aware of any strings so they don't get in the way.

 

[Kysmiley1]

Thanks for the tips I was thinking because of the thickness it may be a little different than T-shirts. Yes I will also be using a flash unit. So I will keep it high enough so it does not burn the hoodie yet drys the ink.
Pat

 

[Dad]

Most of the time no need to flash before the dryer unless you have an underbase.

Dad