[GoldieGirl]

Hi Guys. Do any Queensland Members have a Roland BN20 I could see in action? And would you be willing to do a short run of T-shirts and Hoodies for me so I can see the quality it produces? xxx

 

[rudi]

I have one down here in Sydney.Happy to print some transfer out and send to you to press yourself. Contact me if interested.

 

[GoldieGirl]

Thanks so much Rudi

 

[Prytec Solutions]

Hi GoldieGirl,

We would be happy to do some print samples for you so you can see the quality. Give us a call.

www.prytec.com.au

Cheers,

Prytec Solutions

 

[GoldieGirl]

Thanks for your offer. Rudi was kind enough to make some samples for me that turned out so well I have ordered my own Roland and it arrives on Friday. Can't wait !

 

[Prytec Solutions]

Thanks for your offer. Rudi was kind enough to make some samples for me that turned out so well I have ordered my own Roland and it arrives on Friday. Can't wait !

Congrats! Let me know if you need any help.

 

[Tizz]

Hi Goldie, are you able to post some pics of the samples that were made for you? Would love to see how these came out pressed. Only if you can.
I too am considering getting a BN20.

Regards,

 

[GoldieGirl]

Hi Goldie, are you able to post some pics of the samples that were made for you? Would love to see how these came out pressed. Only if you can.
I too am considering getting a BN20.

Regards,

I dont think I can as they were of my logo. But I can tell you the quality is superb.

 

[Prytec Solutions]

Hi Goldie, are you able to post some pics of the samples that were made for you? Would love to see how these came out pressed. Only if you can.
I too am considering getting a BN20.

Regards,

Hi Tizz,

Happy to do a sample for you. Any particular file you want printed? We supply BN-20 printers and heatpresses.

Cheers,

 

[GoldieGirl]

Loading media continues to be a problem for me - so much so I avoid having to change a roll as much as possible.

Tutorials show its so easy to feed in the media.

The media puckers because the edges just wont in slide under those fixed inch rollers.

Is there an simpler solution?

 

[gjsmachinery]

Hi Goldie,

It is very simple to load media into the BN-20. You should have been guided through this at the installation and training on the machine.

What media are you using? Are you raising the media lever before trying to slide the media under the rollers?

Please do not hesitate to contact me if you have any questions.

Cheers
Greg

 

[scuba_steve2699]

the media HAS to go underneath the rollers. If the lever is engaged that engages the pinch rollers, then you will not be able to put the vinyl under them. To have the machine run the media back and forth for cutting and printing, it must be under those rollers.

 

[Prytec Solutions]

Hi GoldieGirl,

The BN-20 has a lever you move up and down to release or engage the pinchrollers, you need to release the pinchrollers before you feed the media through.

These printers should have been installed by your Roland supplier...if you need some training we are happy to help as we are in Queensland also.

Kind Regards,

Raymond

 

[GoldieGirl]

Thanks guys. I understand what you are saying but it is never simple for me - the media always puckers.

Perhaps it is because my BN20 is on a stand with its back to the wall? I access it from the front only.

I dread changing a roll.

At the moment the roll has been removed altogether and I am trying to print on a special piece of media 12" wide and 2ft long. The instructions say it will print a piece only 6" wide, but not my machine. It keeps telling me "setup incomplete".

 

[GoldieGirl]

Greg, thankyou SSSOOOOO much for your help today.

I had no idea that the right media roll must always be placed over a grid section of the silver bar.

Not only did it work, I now have finished leather products. You are a genius.:tipthank: Thankyou!

 

[gjsmachinery]

You’re welcome Goldie =) Glad I could help.

Please let me know if there is anything else you need assistance with!

All the best

Greg