T-Shirt Forums banner
1 - 1 of 1 Posts

· Registered
2,613 Posts
Discussion Starter · #1 ·
Expand your cap-front embroidery capabilities with the new Durkee multineedle frame, available from The PAS Store. Attached to a multineedle machine, the front-load frame makes it possible to sew a design or logo up to 5 inches wide and 4 ½ inches tall.

Simply clamp the bill in place like a regular hoop and press down on the cap front that’s tacked down with sticky backing or stabilizer. After sewing the front design, you can turn the cap around and clamp down the back tabs to embroider the cap back as well.

Priced at less than a typical cap hooping system, the Durkee frame is available for multineedle machine models from many manufacturers. To learn more, go to https://www.brothermall2.com/DisplayMaterials/Index/2/3/18.

For additional information, contact The PAS Store via phone at 1-877-850-7179 or email [email protected].


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.