T-Shirt Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
Has anyone sublimated on The Authentic T-Shirt Company Pro Team Home & Away Athletic Shirts? i was reading the spec sheet on it and it states
• Garment temperature must not exceed 320°F or 160°C. Exceeding this temperature will cause the fabric to shrink, become wavy or cause dye migration.
and

• Sublimation Printing: As noted for the poly mark heat transfers, this process can only be done on white or very light coloured fabric. Inks used in printing paper design need to be darker than the base fabric or colour will migrate with the fabric colour resulting in a bleeding effect.
Do i not need to get up to higher then 320°F for the process to work?

here is a link to the spec sheet i am going off of

[media]http://www.blankshirts.ca/specs/S3519.pdf[/media]
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top