T-Shirt Forums banner

Tajima embroidery machine stitch caps to arm of machine...Help

3836 Views 4 Replies 5 Participants Last post by  Bodwick
Hello... Looking for help...I have been running puffy foam caps. My machine is stitching the cap to machine. It is laying an huge amount of thread between inside of cap and the arm of machine.I would greatly appreciate any help anyone could give me. My machine is a Tajima TFMXC1501/450WCT .Thank P
1 - 5 of 5 Posts
take a pic of it and post. it is hard to imagine how to solve the problem without seeing it.
Have you checked your tension on bottom spool and you may want to re-thread to make sure everything is the way it is supposed to be.
I had an issue with nesting after I'd run some merrowing thread through as a test. It was a big mistake and I ended up stripping the entire front end looking for the problem this thread caused.

I eventually took apart the rotary hook removing the little screws to find enough thread/fluff to stop the hook flowing freely on the runner. This thread was completely hidden on the running track but was enough to cause all sorts of errors.

Undoing the screws shown here breaks the hook into parts for cleaning.
See less See more
  • Like
Reactions: 1
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.