T-Shirt Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
113 Posts
Discussion Starter · #1 · (Edited)
We have one Epson Stylus Color 3000 that was used for sublimation printing. This unit works well; it just needs a new yellow print head. Yellow ink is full, Cyan and Magenta are around ¼ of the way full and Black is about 1/3 full. ($275 worth of sublimation ink) We are asking $600. Here are the factory specs.
  • Four-color (CMYK) drop-on-demand Micro Piezo® ink jet technology
  • Monochrome head: 128 nozzles (K)
  • Color head: 64 nozzles x 3 (CMY)
  • Epson standard Dye Inks
  • Single size droplet
  • 1440 x 720 dpi; 720 x 720 dpi; 360 x 360 dpi; 180 x 180 dpi
  • Maximum engine rated print speeds up to 7 PPM monochrome; 7 PPM color (letter size)
  • Based upon print engine speed only. Total throughput times depend upon front end RIP, file size, printer resolution, ink coverage, networking, etc.
  • EPSON ESC/P 2, IBM XL24E
  • Adobe PostScript 3 with software driver
  • Operating Systems Supported
  • Windows 95, Windows 98, Windows NT 4.0x, Windows 2000, Windows XP compatible using Windows resident driver, Macintosh system 7.x or higher Adobe PostScript 3 software driver (CPSI) for Windows 95/98 and Mac OS
  • Bi-directional parallel interface (IEEE-1284 Level 1 device) Macintosh compatible 8-pin mini-din serial interface (Up to 1.8 mbps max. transfer rate)
  • Printable Area
  • Live print area: 16.12" x 21.31"; top margin: .14", bottom margin: .56", right margin: .25", Left margin: .13"
  • Input paper tray: 100 sheets/10 envelopes
  • Output paper tray: 30 sheets
  • Plain, bond, EPSON Photo Quality film and paper, transparencies, self-adhesive sheets, Photo Quality ink jet cards, high quality banner paper, labels, envelopes, and iron-on transfers
Bold Images 280 Aldergrove Rd. Arcata 707-822-6838 ext. 0
or 1800-427-6838 Ask for Shirley or Josh
 
1 - 1 of 1 Posts
Top