T-Shirt Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5,478 Posts
Discussion Starter · #1 ·
My assumtions and please correct me if I am off target. I do heatpress vinyl and am very familiar with this process. When printing on transfer paper with sublimation...you heatpress the transfer and completely remove the paper. The only thing transfered is the design to the blank. Problem is I cant use 100% cotton blanks...is this correct? When creating transfer with pigmented inks....I need to cut out the transfer and when pressing, a backing stays on the shirt resulting in an outline of the design. With this process I can use 100% cotton shirts. Is this correct? Is there a transfer printing method that just delivers the design to the blank like sublimation that I can use 100% cotton blanks? Hope I got that fairly clear for a response?? Thanks!!!
 

·
Registered
Joined
·
5,478 Posts
Discussion Starter · #3 ·
Rodney said:
I'm no heat press expert by any means, but it sounds like you're looking for plastisol transfers (like those you can get from silvermountaingraphics).
Thanks Rodney...obviously you have an idea of what I am looking for. Transfers that have no transfer paper border. I wi;ll look into your recommendation and see if I can get some education. Would really not like to have anything done outside...rather be in control of my own production and time schedule. I do complete custom work on the spot with heatpress vinyl but sure would like the ability to do the same in multi color or without the weeding process. At events time is everything....we are doing vinyl graphics at the same time as vinyl heatpress...so nice just to have the printer running while I am doing something else. Anyone else with suggestions or ideas please hit me!!!
 

·
Registered
Joined
·
5,478 Posts
Discussion Starter · #5 ·
Solmu said:
As far as I know you have the pros/cons down accurately.

There are specific shirts made for dye sub that have cotton inners (for customer comfort) and polyester outers (for printing on), but they're not cheap.
That really is the problem period!!!! The two ply shirts are expensive and I dont think what customers would actually want to put on thier bodies. I hate polyester and blended shirts...especially outside in the sun and heat!!!!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top