T-Shirt Forums banner

sublimation inks not printing right: need help please!

2K views 6 replies 6 participants last post by  TJLewis 
If I get air in the pipes when I refill my bulk inks I can get rid of it by using a large syringe supplied by the inks company, this is used to draw the excess air out of the pipes by putting the nozzle into each hole and the cartridge and slowly pulling back the syringe until the ink runs clear.
Any ink taken out accidently can be put back in so isn't wasted.
Justin
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top