T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
145 Posts
I had this problem with some of the transfers that had thin lettering or thin pinstriping and what I do with these types of transfers is re-press the shirt for a few more seconds or if you have to...another cycle, using a Teflon sheet on top of the transfer. This seems to make the transfer stick nicely. Hope this helps you out. ;)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top