Squeegee Sharpening

You could try it with an old blade... I don't know of any plans..

Thanks,
Jeron

You need a bit that is wide and you have to go very very slow or it can chunk the squeegee I have used a router with a router table. The quickest DIY is to take spray adhesive and first 80 grit sand paper and spray to a surface the rub the entire squeegee across the surface. Then do with 200-2000 grit sand paper. The squeegee sharpeners are just a big belt sander with a place to rest the squeegee.

Could you take a typical belt sander and mount it upside down in a table... similar to a router table.... then push the squeegee across like you would a wood Jointer?

Or would it take to much material?

Thanks,
Jeron