[cheetahjab]

Hey All,

So I picked up a new r1900 printhead from compass micro, who's happily informed me they can not assist me in acquiring the Epson Adjust software, and all the instructions I've read place it in the Anajet Utility, which doesn't contain much beyond the waist ink counter reset.

So Here I am with a new print head, and It seems a lot of you on here have replaced them several times in the past, any insight on how to do this with out bricking the printer would be fantastic! Thanks so much in advance.

James - CnC Printing

 

[HobbyPrint]

Hey All,

So I picked up a new r1900 printhead from compass micro, who's happily informed me they can not assist me in acquiring the Epson Adjust software, and all the instructions I've read place it in the Anajet Utility, which doesn't contain much beyond the waist ink counter reset.

So Here I am with a new print head, and It seems a lot of you on here have replaced them several times in the past, any insight on how to do this with out bricking the printer would be fantastic! Thanks so much in advance.

James - CnC Printing

You can watch the video in this link
Anajet Sprint Tutorial : Print head Replacement V…: Anajet Sprint Tutorial : Print head Replacement Video - YouTube

 

[cheetahjab]

So is Epson adjust somewhere on the anajet driver cd? Sorry if I'm coming off ignorant of the subject.

 

[soko61]

I just replaced my Sprint's head by simply swapping it out with the old one. I then fired up the machine and it worked fine. What do you mean by Epson Adjust?

 

[cheetahjab]

I just replaced my Sprint's head by simply swapping it out with the old one. I then fired up the machine and it worked fine. What do you mean by Epson Adjust?

Well you usually have to use the R1900 Epson Adjust program to put the new print head serial into the board for it to work.

 

[soko61]

Interesting, I didn't have to do that. I of course had to give my printer serial number to the reseller and again just installed and was off and running.

 

[soko61]

I just replaced my Sprint's head by simply swapping it out with the old one. I then fired up the machine and it worked fine. What do you mean by Epson Adjust?

 

[soko61]

Oops sorry for the above duplicate. Not sure what I did.

 

[drdeath19134]

Just drop it in and print only use program if you are having problems.

 

[Ixtapotl]

The Epson Adjustment program is only used for the FP-125. You should be able to install the printhead in a Sprint without a problem.

Sent from my KFTT using T-Shirt Forums

 

[eShirts]

Is Compass Micro comparable to DTG Inks for the head? I have been nervous about replacing mine and I'm sure it will be due soon. Thanks, guys!

 

[cheetahjab]

Is Compass Micro comparable to DTG Inks for the head? I have been nervous about replacing mine and I'm sure it will be due soon. Thanks, guys!

Same epson print head, $84 cheaper

 

[eShirts]

I was nervous about buying from anyone but Anajet for a while, but I seem to get the same quality at always a better price with other parts. I appreciate your input about the printhead.

 

[cheetahjab]

I was nervous about buying from anyone but Anajet for a while, but I seem to get the same quality at always a better price with other parts. I appreciate your input about the printhead.

Sadly I think Anajet's sudden destructive lack of support for the Sprint in the aftermarket is because people havn't been forced to buy parts nore ink from them because of aftermarket availability.. Honestly after having talked with the reps there, I could honestly say I'd put my money else ware when I go to replace the sprint.

 

[DTGPRINTERPARTS]

Adjustment software isn't needed for the Sprint, just plug and play. Good support is hard to find now. If you buy a used machine or out of warranty nobody will help now!