T-Shirt Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
10,512 Posts
What you're talking about is an all over print, it can't be done with a heatpress. To answer your second question, if durability is an issue then screenprinting is the better of the two options (heat pressed designs can, though won't necessarily, crack - screenprinting can if badly printed, but it's not likely).

All over printing is normally done prior to the garment being sewn, but sometimes is done afterward using a roller printer. It's not really possible with the kind of average equipment most shops have to hand. Technically there's nothing to stop you, but it's impractical enough that you couldn't really do a full production run.

The question comes up a lot on the forums, and if you search here you might find some information on where to get all over printing done (I think a little has been posted on where, although not much).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top