T-Shirt Forums banner

Soft Jet Dark oversaturated printing issue

1338 Views 2 Replies 3 Participants Last post by  BTF
recently purchased some sheets of Soft Jet Dark paper to try out. I used my normal 'standard' setting on my printer but the transfer came out wet looking and oversaturated with ink! Ive never had this problem before. Any help with printer settings or image adjustments to correct this problem would be appreciated!
1 - 3 of 3 Posts
What type of printer & ink are you using? You should be using pigment ink which dries almost immediately after printing & will not have a wet look.
I've also had that problem but only somehow when the ink level on the printer is low(not sure why though)
but after cleaning head and all maintenance(refilled my ink, alignments etcs..) it prints fine now.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.