[SnBshirts]

I have a new 2 color 1 station silver press, and when you lower the screen to the platen, there is a heavy angle on the screen. i.e., if I were to set my off contact aprox 2 penny widths at the front of the screen, the rear of the screen will be sitting almost a 1/2" off of the platen. Is it supposed to be like this? Am I missing some adjustment somewhere?

 

[SnBshirts]

aahh, I figured it out. but could not figure out how to delete this post?

 

[lben]

I was going to say, you probably need to work on those screws on the side of the arms to level it out. Glad you found them.

 

[Greatzky]

I have a new 2 color 1 station silver press, and when you lower the screen to the platen, there is a heavy angle on the screen. i.e., if I were to set my off contact aprox 2 penny widths at the front of the screen, the rear of the screen will be sitting almost a 1/2" off of the platen. Is it supposed to be like this? Am I missing some adjustment somewhere?

If Your press came with a DVD about you press WATCH IT TWICE and take notes before you do anything... it will make a huge difference and save you a lot of time!!