T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
208 Posts
I use alot of r-tape. It works fine on most applications but sometimes if I cut weed tape and store it for much time before i apply it it is hard to get it to pull the vinyl from the backing. I have also used the A-60 clear tape. It is a high tac product that will pull the vinyl right off the backing so you can apply it.

Biggest problem I have is the A-60 has a rough edge where you sqeegie it to the weeded vinyl and for some reason I seem to get more bubbles when applying the A-60 tape. It will always work ut ok though I just don't like the feel of it.

Hope this helps

Dad
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top