T-Shirt Forums banner

Service Req 1000A

1249 Views 5 Replies 2 Participants Last post by  IYFGraphics
I had a problem with my Blazer Express, the height sensor was keep triggering so I disabled the height sensor, but it was still getting triggered. So I enabled it and now the service says 1000A. Does anyone know what service 1000A means? Please help!!!
1 - 6 of 6 Posts
Also, the error comes up as soon as I press the on button. The print head unlocks and then printer shuts down saying the error 1000A and I always have to push the print head back into the right
Still having trouble! Please help!
I tried to clean the sensor near the head, and firmly attached the wires that are on the small black board that is glued to the side of the cartridge area. Nothing works!
Still having trouble! Please help!
I tried to clean the sensor near the head, and firmly attached the wires that are on the small black board that is glued to the side of the cartridge area. Nothing works!
David,

From another post.....

0001000A Carriage home position error (Check Sensor and mechanical components)

This thread.....

http://www.t-shirtforums.com/fast-t-jet/t96063.html

Hope this helps.
  • Like
Reactions: 1
Thanks a lot for the reply Jon!
But do you happen to know which sensor is getting tripped?
Thanks a lot for the reply Jon!
But do you happen to know which sensor is getting tripped?
Sorry Dave but I can't help you, maybe Harry from Equipment Zone will see your post and reply.

Sorry....
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top