T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter #1
is it possible to do two passes with a flash to increase the thickness of your transfer?

if so would I need to put adhesive powder on the first layer then lay the second ?
 

·
Registered
Joined
·
1,923 Posts
I am sure a pro can answer from experience, but I dont see how it would be any different then print/flash/print. As long as you dont get in the curing temps then the plastisol should stick to plastisol.
 

·
Registered
Joined
·
91 Posts
Good Day,

If you want to deposit more ink on the paper, for a thicker film layer, try using a coarser mesh screen, maybe a 83, or 60 mesh, or additional coats of emulsion to create a deeper Well!

Regards, ATC
 

·
Registered
Joined
·
120 Posts
Discussion Starter #4
ok, but is it possible to flash and add another coat.

also when would I add the powder and suggestions? I was thinking of getting a rubbermade tub larger than my papers and a salt shaker. shake the powder on in the tub to catch the excess and control the mess??
 
1 - 4 of 4 Posts
Top