T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
382 Posts
It sounds to me like they aren't putting enough ink down. All you have to ask them is to spot dry the first print then hit it again with the ink a second time. This will put another layer of ink on top of the now dried one which will get rid of the "fuzzy" stuff you're talking about.

Sometimes (especially on darks) it's difficult to completely get rid of this because when the screen touches the shirt on a pass it's not completely smooth, the screen will stick to the shirt for a moment and pull up some of the fibers.

Also most people only hit the ink once on light shirts because the ink doesn't have to be as opaque. I've noticed on shirts I've purchased that the thread coming through the design is a little more apparent. But as I stated before, hitting the ink again after a spot dry should make it look better, BUT it will make the ink much thicker on the shirt which will in turn make it worse in hot temerperatures on the wearer.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top