[GO LIVE]

Does anyone know where the Sport-Tek Competitor Tee ST350 is made? I think Mexico but I am not sure. Anyone have this shirt? I checked the site, no luck.

Thx-

Tom

 

[guero3384]

Here you go

 

[GO LIVE]

Thank you! However, a representative just called me back saying they are made in Tanzania and China as well. I am assuming for different colors.

 

[guero3384]

Thank you! However, a representative just called me back saying they are made in Tanzania and China as well. I am assuming for different colors.

Could be but it just depends sometimes they just come in mixed being the same color.. I usually only deal with white or silver for the sublimation..

 

[xcelr8hard]

Could be but it just depends sometimes they just come in mixed being the same color.. I usually only deal with white or silver for the sublimation..

Jesse,
What settings are you using for the ST350? I am not having much luck.
Thanks,
Butch

 

[superD70]

I think they sublimate great, they run a little on the large side though.
I recommend you keep some on hand for customers to try on.

 

[ericsson2416]

We have screen printed on ST350 and customers seem to like them. Pretty good product at a decent price. Yes, I also recommend keeping a couple on hand for customers to try on.

 

[macman29681]

I think they sublimate great, they run a little on the large side though.
I recommend you keep some on hand for customers to try on.

I have tried to sublimate them but no matter what I do I get a press line from my 16x20 fusion press. I use a teflon pillow and really light pressure and still no success. Any advice?

 

[superD70]

I use a Teflon pillow and a Teflon cover sheet, light pressure @ 350* for 60 sec.
You are getting a press mark and not the outline of your paper? Correct?
If so I'd say your temp & pressure are too high still

 

[macman29681]

I use a Teflon pillow and a Teflon cover sheet, light pressure @ 350* for 60 sec.
You are getting a press mark and not the outline of your paper? Correct?
If so I'd say your temp & pressure are too high still

I do use a pillow and a teflon cover sheet. I always tear the paper by hand around the image to not have a line but it is always my press that leaves a 16x20 box around the shirt. The pressure reads a 1 on my fusion press.

 

[guero3384]

Jesse,
What settings are you using for the ST350? I am not having much luck.
Thanks,
Butch

I use medium pressure at 410 degrees for 30 seconds...

 

[guero3384]

I use a Teflon pillow and a Teflon cover sheet, light pressure @ 350* for 60 sec.
You are getting a press mark and not the outline of your paper? Correct?
If so I'd say your temp & pressure are too high still

I have always got the outline of the paper? If im not mistaken i think after the first wash the line comes off from the paper...

 

[superD70]

From my experience any press marks on polyester never wash out