T-Shirt Forums banner

Safe Plastisol Ink Remover other than Bean-E-Dooo?

919 Views 5 Replies 5 Participants Last post by  sben763
We have been using Bean-E-Dooo for a while now because It's safe for Human use and the environment but It just leaves to much of an oily residue after using it. Does anyone know of a solid Plastisol Ink Remover that Is also safe for handling? Thank you In advance!
1 - 6 of 6 Posts
We have been using Bean-E-Dooo for a while now because It's safe for Human use and the environment but It just leaves to much of an oily residue after using it. Does anyone know of a solid Plastisol Ink Remover that Is also safe for handling? Thank you In advance!


On press or off press?


Sent from my iPhone using Tapatalk
We use Greenway (I think Franmar changed the name but you can still get it). Works great and then spray the screen with water and wipe with a paper towel to remove any residue.
  • Like
Reactions: 1
I have the same problem using the Franmar Bean-E-Doo.
Tape will not adhere to the screens once the Ink Remover
has been used to wipe out a screen.

I generally can burn 2 different images at either end of my
screens and tape off one when using printing the other.
However, if it I clean off the ink for a color change or to
tape off and use the opposing image, Tape will not adhere to
the oily surface the Bean-E-Doo leaves behind.
On press or off press?


Sent from my iPhone using Tapatalk
Both actually.
Both actually.
When off press Bean-e-doo is meant to use with water. Most screen wash leave a oily residue that doesn’t allow tape to stick. CCI has a good envirowash but also leaves residue. Franmar has a products, color change and greenway. They are more expensive and still leave a slight residue.

I use the bean-e-doo the use 91% alcohol to remove residue when doing a color change. If cataloging a screen the oily residue seems to dry out
  • Like
Reactions: 1
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top