T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
69 Posts
its the FLASHING that will give you rough texture.. you do NOT need to do any more that PFP on white.. if you are, something ELSE is wrong..

you should print white with a 110 to 135 mesh, a nice thick stencil, good off contact, a good fill stroke to fill the stencil, and use a push stroke...research on the right ways to print white.. its easily done in 1 maybe 2 passes..

remember you want to lay your ink ON TOP of those fibers.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top