T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,262 Posts
What screen mesh? How thick is your emulsion? If you can get by with two ink coats, you will get a better finish. It might help to go a little longer on the flash, a little beyond the jel stage, even up to 260 degrees F. Doing this with the first flash helps greatly with fibrillation, holds the fibers of the fabric down for subsequent print passes. It might also help eleminate the need for the third print stroke. God Bless.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top