T-Shirt Forums banner


1187 Views 0 Replies 1 Participant Last post by  kraftgg
I have a Roland PNC-1210. I know it is old, but it is still going and has treated me pretty good. However, I had a pinch roller split on me recently. I purchased two new OEM which were to be used as a replacement. Not good. Slightly large enough that it is leaving a black mark/indention along the edge of my vinyl and it dogtracks. I also have a not so good sound when I tested it. My manual states Roland Camm-1 Pro PNC-1860, PNC-1410, PNC-1210. I believe that they are all the same pinch roller. Anyone have a model kicking around that I can buy the rollers? I cannot afford a new cutter right now after upgrading all of my other equipment. Besides, there isn't anything wrong with this cutter other than the roller. Thank you.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.