T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
Hi,
Can I use Roland GX24 to cut Forever transfer papers? Or is it purely for flex Papers and vinyls..?

Thank you
 

·
Registered
Joined
·
1,262 Posts
You shouldn't cut straight through anything with a vinyl cutter, as it will jam in the cutter. As long as there is some form of release liner, or solid paper underneath the actual transfer paper, it should work fine. JetPro SoftStretch is one transfer paper that people cut with a vinyl cutter, if you've used JPSS and Forever is similar in its working (except that it's designed for darks), then it should work fine.
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #4 ·
You shouldn't cut straight through anything with a vinyl cutter, as it will jam in the cutter. As long as there is some form of release liner, or solid paper underneath the actual transfer paper, it should work fine. JetPro SoftStretch is one transfer paper that people cut with a vinyl cutter, if you've used JPSS and Forever is similar in its working (except that it's designed for darks), then it should work fine.
Great, Thank you very much. I will try with the release paper for the transfers..
 
1 - 4 of 4 Posts
Top