[Squewheet]

I bought a Rhinotech Sunangel System and I printed a few transfers on the Single Step Easy Weed papers. And I printed a few shirts for my kids on white shirts and then after washing the shirts the images are cracking and peeling off the shirts. And one have a idea why this might be.

 

[Skinbus]

You may be using the wrong type of paper. I'm not familiar with the brand but you should be using transfer paper for light colored shirts. When pressed properly, you'll barely be able to feel the paper on the shirt. After washing it, you shouldn't feel it at all. I always wash transfers inside out & in cold or warm water. Cold is best, & even though the shirts are white, do not use bleach or it'll destroy the ink. Also, use low heat in a dryer. It shouldn't crack or peel.

 

[Lnfortun]

I bought a Rhinotech Sunangel System and I printed a few transfers on the Single Step Easy Weed papers. And I printed a few shirts for my kids on white shirts and then after washing the shirts the images are cracking and peeling off the shirts. And one have a idea why this might be.

That is typical of single step self weeding paper. I suggest using 2 step self weeding Imageclip Laser Light.