T-Shirt Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
996 Posts
Discussion Starter #1
I know that the I-DesignR CE will work with the cutter and the Funtime will not support the CE. What other rhinestone software under $350 will support the CE ?
 

·
Registered
Joined
·
1,651 Posts
Re: Rhinestone software for the CE 5000-60

Check the threads here for the FunTime 2010/WinPC Sign. There are lots of cutters supported by at least the WinPC sign version I believe.
 

·
Registered
Joined
·
996 Posts
Discussion Starter #4
Teach....that looks good as far as features go. I will have to look at it a little more. Do you (or anyone else on here) ues it ? Let me know some reviews.
 

·
Registered
Joined
·
1,651 Posts
There's a very extensive thread here on the forum about the ACS products, both by those that use them and those that sell them. Do a quick search and it should come up.
 

·
Registered
Joined
·
1,441 Posts
I know that the I-DesignR CE will work with the cutter and the Funtime will not support the CE. What other rhinestone software under $350 will support the CE ?

My Graphtec CE-5000 60 works fine with the FuntimeDeluxe 2010 software. :)
 
  • Like
Reactions: DTFuqua

·
Registered
Joined
·
1,107 Posts
Here are a few different threads that tell you more about the ACS software. I have the ACS software and so do a lot of other people on the forum. It is a good software and does work well with several cutters. Funtime is another good software and there are several different users that use it also. I do believe that the Funtime software is more limited on the different cutters that it has drivers for but the same company makes the winpcsign software that is a little bit more expensive but has more drivers for more cutters. Hope these help.

ACS software and what it can do
http://www.t-shirtforums.com/rhinestone-decoration/t105195.html

ACS and KNK softwares and the differences
http://www.t-shirtforums.com/rhinestone-decoration/t93093.html

Videos for ACS software
http://www.t-shirtforums.com/rhinestone-decoration/t119512.html
 

·
Registered
Joined
·
1,017 Posts

·
Registered
Joined
·
230 Posts
I JUST bought Funtime Deluxe PRO, few minutes ago. Is the most affordable solution I've found to design templates, and I have a Graphtec CE3000-60 which is not supported in theory, but I don't care since I plan to design on Funtime and export to flexi and cut from there.

It works even better if you have in mind to upgrade your cutter in the future and have no idea what you're gonna get. With that I mean it should be used as a standalone design software, and you should cut with your everyday cutting software. Hope it makes sense :)

EDIT: Here's the place with the best price I've found http://www.rhinestonedesignz.com/Software/RA-00001-Funtime-Deluxe-Pro-2010.html
 
1 - 10 of 10 Posts
Top