HI everyone... any idea whats happening here? im about 15 shirts and films in and same results. this is my last effort. i got the heat press to the exact right temp tested with heat gun..... these 3 photos are my last efforts.same temp 3 different pressure setting and same results... any idea what im doing wrong or whats causing th[/ATTACH][/ATTACH]is?
Reveal-s question and or help!!!!
1 - 6 of 6 Posts
Joined
·
4,354 Posts
maybe upload the pic of your original artwork,
because anyone of the three could be close as far as we know
this is a new product, so you might be our resident expert
no pressure though, just keep us updated and be available by phone 24/7
because anyone of the three could be close as far as we know
this is a new product, so you might be our resident expert
no pressure though, just keep us updated and be available by phone 24/7
I also had issues with the Reveal paper. I sent a picture to Conde tech support. They suggested that I do max pressure. I have a Stahls Hixtronics press and set it a 9 (max for the press). I had started at the suggested temp and they told me to keep the time the same at 18 sec and only increase the temp by 5 degrees until I got a good print. I did try this but still had issues. I still have a few sheets of the sample pack I purchased and will try again. I found by having the increase pressure it made it difficulty to remove the carrier sheet. If I can't get good prints after using these additional sheets I am giving up on it.
I need a product that will give me consistent result and make me $$$. So far vary disappointed. I think it is a great idea to be able to sublimate on cotton and really had hoped this was the answer. So far the jury is still out on this. You might try this or send a picture to Conde tech support and see what they come up with (I assume you purchased the paper from them. If you get good consistent results please share as many have struggled with this product.
I hope my comments are not discouraging to you and maybe these procedures will work for you. Again, I think you need to contact the company you purchased the paper from. You are not the only one who has had issues with this product.
I need a product that will give me consistent result and make me $$$. So far vary disappointed. I think it is a great idea to be able to sublimate on cotton and really had hoped this was the answer. So far the jury is still out on this. You might try this or send a picture to Conde tech support and see what they come up with (I assume you purchased the paper from them. If you get good consistent results please share as many have struggled with this product.
I hope my comments are not discouraging to you and maybe these procedures will work for you. Again, I think you need to contact the company you purchased the paper from. You are not the only one who has had issues with this product.
Joined
·
1,120 Posts
This was discussed on here a couple of months ago. Here's a link. That was when it was brand new. They sent me a sample shirt that was much less than perfect and I was shocked. I would have thought that they would at least try to snow me with a flawless example.
And it turns out that Trav was having the exact same problem with his prints that were showing on my example shirt printed by Conde.
I would have thought that they would have made improvements by now.
I was so excited to learn of this product! But then totally deflated. We'll see what the future holds.
And it turns out that Trav was having the exact same problem with his prints that were showing on my example shirt printed by Conde.
I would have thought that they would have made improvements by now.
I was so excited to learn of this product! But then totally deflated. We'll see what the future holds.
Joined
·
1,628 Posts
What printer are you using?
Is the ink releasing from the film? You may want to contact our Support. It is important to measure your press temp with a device like a digital metal candy thermometer.
BTW: the Reveal Textile printer has been shipping for awhile. Using a textile ink and the Reveal film, you can decorate all types of artwork.
Sent from my iPhone using Tapatalk
Is the ink releasing from the film? You may want to contact our Support. It is important to measure your press temp with a device like a digital metal candy thermometer.
BTW: the Reveal Textile printer has been shipping for awhile. Using a textile ink and the Reveal film, you can decorate all types of artwork.
Sent from my iPhone using Tapatalk
1 - 6 of 6 Posts
