T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Hi everyone,

Has anyone ever come across this error message before on an resolute r jet 4 or 5? based on epson 4880 (RELEASE LEVER REMOVE PAPER JAM)

We restarted the printer by turning off unplugging etc but still no look.

When the machine boots up the printer head comes across to cut the paper and stops about half way and then we get this message.

The box is clean the encoder strip is clean. the paper cut mode is set to scissors and a paper sheet.

We currently can't do anything . Any help greatly appreciated.

Thanks
 

·
Registered
Joined
·
837 Posts
Hi everyone,

Has anyone ever come across this error message before on an resolute r jet 4 or 5? based on epson 4880 (RELEASE LEVER REMOVE PAPER JAM)

We restarted the printer by turning off unplugging etc but still no look.

When the machine boots up the printer head comes across to cut the paper and stops about half way and then we get this message.

The box is clean the encoder strip is clean. the paper cut mode is set to scissors and a paper sheet.

We currently can't do anything . Any help greatly appreciated.

Thanks
Hi Sam,

I am aware your main board was blown by using printhead bullet and your friend fixed it. Did this error occur before or after this.

Regards

Colin
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Hi Sam,

I am aware your main board was blown by using printhead bullet and your friend fixed it. Did this error occur before or after this.

Regards

Colin
Hi Colin

Over the last few weeks we have had problems with registration and error codes 001004 etc and from researching and calling you guys we gathered the encoder strip was dirty or marked, yes you are right that the fuse blew that fires the nozzles on the printhead but was fixed by a technician we know who solved it straight away, then problem was the encoder strip afterall and after purchasing another one from your site we are printing better than ever before, the printhead cleaner has transformed our prints and we are literally shocked, its like we have a brand new machine, as it is pre owned we expect to run into these problems due to its history and age etc which we will purchase what needs replacing in the future,

But in short words we are creating some awesome prints now, i will happily pot some pictures on the resolute post of some of our tshirts.

Thanks Colin
 

·
Registered
Joined
·
837 Posts
Hi Colin

Over the last few weeks we have had problems with registration and error codes 001004 etc and from researching and calling you guys we gathered the encoder strip was dirty or marked, yes you are right that the fuse blew that fires the nozzles on the printhead but was fixed by a technician we know who solved it straight away, then problem was the encoder strip afterall and after purchasing another one from your site we are printing better than ever before, the printhead cleaner has transformed our prints and we are literally shocked, its like we have a brand new machine, as it is pre owned we expect to run into these problems due to its history and age etc which we will purchase what needs replacing in the future,

But in short words we are creating some awesome prints now, i will happily pot some pictures on the resolute post of some of our tshirts.

Thanks Colin
Great, glad to hear you got it sorted.

Regards

Colin
 
1 - 4 of 4 Posts
Top