T-Shirt Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,800 Posts
Hi Alex,

You can use a sheet of teflon to cover the already printed area of the shirt. Peel the teflon COLD with inks always.

Also, get a bottom plate teflon cover from stahls, this stays on the press always. You will need it sooner or later. More like sooner Eh! :)

Any other questions feel free to post.
 

·
Registered
Joined
·
3,800 Posts
ajizzy said:
wait til the shirt cools before i take off the teflon sheet so it doesn't mess up the image?

thanks lucy
yes, with most inks on a RE-PRESS always let it cool completely before you peel/remove the teflon.

Alex, you will make some mistakes as you go, use scrap fabric to practice, but go for it. Play around and you will get the feel for it as you go. It wont be long before you look back and say " Heck, printing shirts is Eazy ". :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top