T-Shirt Forums banner

Puffy Foam Digitizing help

661 Views 1 Reply 2 Participants Last post by  dgeorge
hello! I'm wondering if anyone can advise me on embroidering with puffy foam, i am digitizing using wilcom E2. do you know roughly what pull compensation yields the best results? i am sewing onto calico with polyester thread, top tension 6 (on machine), satin stitch count 1, spacing 22 , it looks okay ish but needs refining. thanks for reading!:)
1 - 2 of 2 Posts
You must punch the design with very big density,and sew with slow speed.
If will remains puffy parts out of embroidery,use an hot air gun to melt these parts.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.