[Careyoakie]

Hi All,
Just posting for the first time. Having a little trouble with my Proworld heat press today, so thought I'd reach out on the forum to see if anyone has any advice. I was using it fine for three hours this morning at 400 degrees and it suddenly started to cool down. Now it won't heat up past 80 degrees. I have 80 shirts due by next week and I'm not sure what to do. i emailed and called Proworld, but of course it's the weekend and there's no answer. Any advice?

 

[into the T]

model?

open it up and look for a wire that has lost its solder/post pics

is it popping the fuse or your breaker?

always on a weekend with an order waiting....

 

[into the T]

as well as solders, ensure your spade & pin-connectors are pushed in all the way

 

[into the T]

if it is heating up to 80, then it should not be a fuse or breaker (whoever mentioned that is a moron)

you should take your upper platen apart and look for any burnt/loose wires,
it seems like there is not enough amperage running through ie a line loss somewhere

 

[proworlded]

Please email us at [email protected] so a technician can respond to your problem.