[J0cs]

Hi guys!

We are currently having problems in perfecting our whole shirt printing process. Ok na kami with exposure time, strokes and such pero we are still having problems with registration.. Here is our step-by-step process in printing. Please do tell us where we can improve.

1. Artwork Preparation
2. Print color separated designs with registration marks
3. Align all artworks using tape in one master platen with stopper
4. Put double adhesive on each artwork
5. Put frame, with t-guide and screw-eyes, on the artwork and let the double adhesive stick the artwork to the frame
6. Repeat on all artworks and Expose
7. Wash off
8. Printing stage

The problem is kapag nag-try na kami mag-print ng first color sa shirt, ung second frame hindi na nagpapantay tapos ung misalignment niya on different shirts ay iba-iba din. it seems na ung t-guides ung kailangan i-adjust on all platens imbis na screw eye.

If medyo malabo ung procedures, we may be able to explain it if you ask details. thanks!

 

[chard]

sir ang problema po nyan e yung mismong pagkakalagay nyo po ng positives sa screen..sa ganyang setup po kasi e wala pong room for errors..dapat po exact location po ang pakakalagay ng lahat ng positives sa platen bago ikabit sa screens..try nyo po basahin itong thread na ito para po makakuha kayo ng advice regarding artwork alignment sa ganyan setup..
http://www.t-shirtforums.com/asia/t108654.html

 

[ruel_g]

Hi guys!

We are currently having problems in perfecting our whole shirt printing process. Ok na kami with exposure time, strokes and such pero we are still having problems with registration.. Here is our step-by-step process in printing. Please do tell us where we can improve.

1. Artwork Preparation
2. Print color separated designs with registration marks
3. Align all artworks using tape in one master platen with stopper
4. Put double adhesive on each artwork
5. Put frame, with t-guide and screw-eyes, on the artwork and let the double adhesive stick the artwork to the frame
6. Repeat on all artworks and Expose
7. Wash off
8. Printing stage

The problem is kapag nag-try na kami mag-print ng first color sa shirt, ung second frame hindi na nagpapantay tapos ung misalignment niya on different shirts ay iba-iba din. it seems na ung t-guides ung kailangan i-adjust on all platens imbis na screw eye.

If medyo malabo ung procedures, we may be able to explain it if you ask details. thanks!

post ka sir ng picture

 

[J0cs]

Sir chard, thanks po sa link, sir ruel_g will post pictures po. salamat sa quick reply kailangang kailangan po yan ng mga newbie tulad namin

 

[BroJames]

Mukhang pre-exposure registration o pre-registration ang problema mo.

Iba't ibang systema sa registration.

Pwede mo idikit ang lahat ng film positives sa platen na may registration marks. Konting tape lang. Tapos maglagay ka ng tape sa ilalim ng uppermost film positive para paglagay mo ng frame, didikit ang tape sa frame(irub mo yung nakabaliktad na tape para kumapit ng husto sa frame). May pagkaperfectionist kasi ako kaya sinigurado ko na align na align muna ang lahat ng film positives bago idikit sa frame. Ito ang gamit ko noong una as inspired by youtube. Pero sometimes, simpler methods works just as fine.

Yung iba naman, pinapatong ang frame with PE sa platen na may registration marks, tinutuldokan ang center ng registration mark, at dinidikit ang film positive dito sa frame na may tuldok(center ng registration mark). Ito ang pangalawang style ko inspired also by youtube and some loca printers as posted. .

Pwede mo rin lagyan ng angular bar na may stopper ang exposure unit mo. May masking tape ako sa salamin complete with registration cross. Dito ko inaalign ang positives, tape sa salamin, then expose. Ito gamit ko ngayon, mas mabilis, and inspired by sir J.